Function and Introduction Automatic trimming on line 1.Short edge of the module enter and exit. 2.Automatic cutting to the excess auxiliary material of the module after lamination. 3.Quick adjustment for long edge, short edge and suck disc. It‘s quick and convenient for model changing. 4.Circulation cutting has been carried on for the four edges with high efficiency. 5.Cutting knife has an elastic contact with glass, contact press can achieve a convenient adjustment. 6.The machine contains material collecting box for cutting scraps and the design makes it easy for cleaning.
Main parameter Applicable module format:(1580-2000)mm*(800-1000)mm , Cycle time:<30s , Max capability:>2880piece/day, Staffs needed on line: none Rated power(kw):2.06kw, Pressure(MPa):0.6MPa , Dimension of outside(L×W×H):2850mmx1950mmx1110mm。
Advantage 1.The equipment made by steel , compressive strength higher, firm and reliable. 2.The machine is driven by servo motor, transferred by chains and guided by linear rail, have the advantages such as precise positioning and stable running. 3.The machine is equipped with safety fence for protective effect. 4.The four edges of the module are cut at the same time with high efficiency and stability. 5.The blade uses arc cutting edge and the back edge of the blade can effectively remove the scraps of the module. 6.The blade uses quick-changing structure which can lead a quick and convenient changing. 7. The blade which be drived by high precise block, can adjusted from wear area to non-wear area. This can reduce the cost and raise the number of blade use and efficiency
|